+91-97170 69696
*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*
| Make: | Daewoo |
| Model: | Puma TT2500SY |
| Year: | 2004 |
| Condition: | Used – Good |
| Equipped With: |
|---|
| Fanuc 18i-TB CNC Control |
| Heavy Duty Box Way Construction |
| Collet Chuck on Main Spindle (Capable 10″ Chuck) |
| Collet Chuck on Sub Spindle (Capable 10″ Chuck) |
| Sub Spindle |
| Servo Controlled Full C-Axis on Both Spindles |
| Both Spindle Synchronization |
| 12 Station Live Tool Upper Turret |
| 12 Station Live Tool Lower Turret |
| Y Axis Capability on Upper Turret |
| Tool Presetter |
| Bar Feeder Interface |
| Coolant System |
| Chip Conveyor |
| Automatic Lubrication System |
| Live & Statics Tool Holders are Mounted on Turrets (As shown in the images) |
| Capacity: |
|---|
| Max Turning Diameter Upper Turret : 15.4″ |
| Max Turning Diameter Lower Turret : 11.8″ |
| Max Swing Over Bed : 31.5″ |
| Max Swing Over Saddle: 24.4″ |
| Max Turning Length: 13.8″ |
| Max Bar Capacity Main Spindle : 3.0″ |
| Max Bar Capacity Sub Spindle : 3.0″ |
| Travels: |
|---|
| X1 Axis Travel Upper Turret: 10.0″ |
| X2 Axis Travel Lower Turret : 8.26″ |
| Y Axis Travel Upper Turret: -2.4″/+2.4″ |
| Z1 Axis Travel Upper Turret: 31.5″ |
| Z2 Axis Travel Lower Turret : 35.4″ |
| A Axis Travel: 31.9″ ( Sub Spindle ) |
| C Axis: 360° (0.001°) Both Spindle |
| Feedrate: |
|---|
| X1/X2 Axis: 787 IPM Rapid Traverse |
| Z1/Z2 Axis: 945 IPM Rapid Traverse |
| A Axis: 945 IPM Rapid Traverse |
| Main Spindle: |
|---|
| Main Spindle Nose: A2-8 |
| Main Spindle Bore: 3.38″ |
| Main Spindle Speed: 3,500 RPM |
| Main Spindle Power: 30 HP |
| Sub Spindle: |
|---|
| Main Spindle Nose: A2-8 |
| Main Spindle Bore: 3.38″ |
| Main Spindle Speed: 3,500 RPM |
| Main Spindle Power: 30 HP |
| Turret: |
|---|
| Upper Turret Capacity: 12 Stations |
| Lower Turret Capacity: 12 Stations |
| Live Milling Speed: 4000 RPM |
| Live Milling Motor: 7.5 HP |
| Turret Index Time (Tool to Tool): 0.2 sec |
| Turret Type: BMT |
| General: |
|---|
| Power Source: AC 220v / 3-Phase / 50/60 Hz |
| Power Requirement: 95.77 kva |
| Machine Dimensions: 160″ x 87″ x 97″ High Approx. |
| Machine Weight: 25,794 lbs Approx. |
